Sander Wide Belt WS-NDA600
This machine is especially designed for tale off heavy materials such as glue panel, bend board, rough lumber.
The first station is a knife planer head, followed with a combination drum & platen head at second station.
Head configuration can be made to meet customer’s requirement.
The spiral planer cutterhead is fitted with 14 x 14 MM, four edge throw away Tungsten Carbide knife inserts, providing superior chip removal rate, minimum noise, and extremely smooth cutting effect.
Changing knife inserts are conveniently done without removing the cutterhead. The spiral cutterhead is precision machined from special aluminum alloy steel by CNC machine center, tempered and precision ground.
Anti-kickback fingers, mounted at the infeed of the machine, this anti-kickback finger gives a safety guard for the operator.
Insufficient pressure protection, in case insufficient working air pressure occurs, the machine brakes automatically for safety guard.
Irreversible running of pressure roller, runs a single direction only, giving an additional safety guard for panel kickback.
Automatic elevation of conveyor table (micro-computer controlled with digital readout), it accurately displays the position of the conveyor table and automatically moves to the setting thickness for planning, sanding.
Panel cleaning brush roller; built at outfeed end of the machine, this cleaning brush roller cleans the powder on the sanded panel.
Hold-down plate is hard chrome treated for maximum wear resistance.
|Min. Working Length||18-1/2″|
|Main Motor (Standard)||15, 15 HP||15, 15, 10 HP||25, 20 HP||25, 25, 20 HP|
|Feeding Motor||3 HP||5 HP||7-1/2 HP|
|Table Hoist Motor||1/2 HP||1 HP|
|Feeding Speed (Variable)||10 ~ 53 FPM|
|Sanding Belt Size||25″ x 75″||43″ x 98″|
|Machine Size (L x W x H)||71″ x 50″ x 81″||88″ x 50″ x 81″||107″ x 81″ x 90″||121″ x 81″ x 90″|
|N. W.||5200 LBS||6400 LBS||7200 LBS||11100 LBS|
|G. W.||5900 LBS||7300 LBS||8100 LBS||12200 LBS|