High production rate, two 45 degree cuts are performed at same time.
Cycle speed is adjustable up to 10 ~ 15 cycles per minute.
60” Infeed and 60” outfeed Work Support table are standard equipment.
A scale is attached on fence, incorporating with a material stop for identical length of cut.
Easy to operate, operator feeds the material & treadle on foot switch for complete two 45-degree cutting.
Fixed saw head for precis on 45-degree cutting.
Pneumatic operates clamp & cutting stock.
Precision ground cast iron table with heavy metal cabinet stands.
Magnetic control with over load protection.
Saw blade come down from top of the table and return right after cutting for safety operation.
PRICE: call for pricing.
|Cutting Width||4″ (100 mm)|
|Cutting Height||4″ (100 mm)|
|Sawblade Sizes||Ø14″ x Ø1″ x 3.0 mm x 120T|
|Spindle Speed||3440 RPM|
|Spindle Motors||2 HP x 2|
1 Vertical Clamp
2 Horizontal Clamps
|Cutting Method||Swing Arm Cutting|
|Table Height||33″ (830 mm)|
|In-feed Extension Table||60″ (1525 mm)|
|Out-feed Extension Table||60″ (1525 mm)|
|N. W.||714 LBS (324 kg)|
|G. W.||880 LBS (399 kg)|
|Machine Dimensions||54″ x 33″ x 52″(1370 x 830 x 1310 mm)|
|Packing Dimensions||65″ x 39″ x 61″(1660 x 990 x 1540 mm)|
|Production Rate||About 245 Cuts Per Hour|