51″ Orbital, belt sander.
This model is especially suited for complicated irregular surface with more flat top surface sanding (other design is available).
Designed for solving irregular or profile surface sanding problems easily and quickly such as sculptured panels, bas-relief or beehive, various profiles of panel inserts, window and raised panel door frames, sculptured doors.
Also, it does a very good job for fine finish, lacquered sanding such as solid wood, veneer, lacquered panel sanding, burr cleaning.
The panel pressure device is specially designed to handle small pieces of stock. It requires no vacuum, saving space and cost.
The new machine structure consists of two reversible crosswise brush spindles, combined with reversible running and reciprocating of 4 ~ 5 short longitudinal brush spindles, permitting cross and longitudinal sanding to be performed simultaneously.
With wide belt sander at the end to do fine finish the top flat surface.
Any type of irregular surface can be sanded easily and quickly.
Simply loosen two screws, and the sanding belt or brush can be conveniently and quickly replaced. No dismantling of bearing is necessary.
PRICE: call for pricing.
|Max. Working Width||40″||51″||40″||51″||40″||51″|
|Max. Working Thickness||5″|
|Wide Belt Motor||–||10 HP||15 HP||10 HP||15 HP|
|Sanding Belt Size||–||40″ x 75″||51″ x 75″||40″ x 75″||51″ x 75″|
|Lateral Brush Motors||2 HP x 2|
|Vertical Brush Motors||1/2 HP x 4||–||1/2 HP x 4||1/2 HP x 5|
|Diameter of Sand Brush||12″|
|Feed Motor||2 HP|
|Clean Brush Motor||1/2 HP||1 HP||1/2 HP||1 HP|
|Table Hoist Motor||1/2 HP||1 HP||1/2 HP|
|Var. Feed Speed (FPM)||10 ~ 40|
|N. W.||5700 LBS||6250 LBS||7100 LBS||7700 LBS||8600 LBS|
|G. W.||6400 LBS||7050 LBS||7700 LBS||8500 LBS||8400 LBS||9400 LBS|