6 Head Double End Tenoner
With the Double End Miter Saw, you can do cut-off stock faster or consider a Double End Miter Saw combined with moulding head. It lets you cut off stock and moulding pattern in a single feed, that saves time, space, and cost.
Air-operated clamp comes down holding sticks firmly in place. After workpiece is clamped, table starts to feed, performs trimming, shaping operations.
With top and bottom saw, you can cut stock clearly, no burrs for a trimming purpose.
Moulding spindle is mounted at the rear of saw head enabling the machine to perform edge moulding after stock is cut off.
The entire cutting cycle, cut-off, shaping tenon or mortise, is automatically operated at single pass of stock feeding.
The table travels on a precision linear motion guide for stability.
The table traverse is driven by power system, ensuring very stable, smooth workpiece feeding.
Variable feed speed permits proper feed selection for hard or soft wood materials.
Big hand wheel adjusts depth of cut.
Heavy cast iron base for durability usage.
All controls are grouped in a control panel.
Industrial full power motor for maximum cutting capacity.
Other size is optional.
PRICE: call for pricing.
|CAPACITY||Max. Length or Cut||60″||60″||~|
|Min. Length of Cut||12″||12″||5″|
|Max. Width of Cut||24″||24″||17″|
|Max. Clamping Thickness||4-1/2″||4-1/2″||4″|
|SAW(TRIM)||Saw Blade Dia.||8″ ~ 12″x 2||8″ ~ 12″x 4||8″ ~ 10″x 1|
|Saw Arbor Dia.||1″||1″||1″|
|Saw Blade Speed||3400 RPM||3400 RPM||3000 RPM|
|Saw Head Swivel (Degree)||360||360||NO|
|MOULDER||Moulder Spindle||1 ” Dia. x 5″ Lx 2||1″ Dia. x 5″ Lx 2||1″ Dia. x 4″ Lx 2|
|(COPE)||Spindle Speed||6000 RPM||6000 RPM||6000 RPM|
|TRAVERSE||Saw Longitudinal Travel||12″||12″||3″|
|Saw Vertical Travel||17″||17″||3″|
|Carriage Cross Travel||24″||24″||20″|
|MOTOR||Saw Head Drive||2 HP x 2||2 HP x 4||2 HP x 1|
|Moulder Spindle||2 HP x 2||2 HP x 2||3 HP x 1|
|WEIGHT||N.W.||1500 LBS||1600 LBS||990 LBS|
|G.W.||1760 LB5||1860 LBS||1200 LBS|