Sander Moulding Linear SD-905P

sd 0604p

Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with conveyor and spring-load pressure rolls at top, without sliding.
Four sanding heads to cover all the three sides profile sanding.
Sanding head can be adjusted forward & backward, up & down and tilted 45 – 90+ degrees.
Variable sanding belt speeds 0 ~ 3600 RPM for the best finish result.
Automatic control jump sanding head stroke design for not round over the front and end of material.
Variable feeding conveyor 10″ to 136″ to get different setup easily.
Sanding belt tension mechanism is self balance designed, it maintains proper tension at all times, that not only provides steady belt pressure but extends belt service life.
Constant sanding pressure is pneumatic cylinder controlled to achieve uniform and superior finish.
Air blower activates clean and cool down the sanding belt.
Extra sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.

PRICE: call for pricing.

Brush Wheel Drive Motor 2 HP
Brush Tilts +90°~180°
Sanding Belt 3″ x 20″
Sanding Wheel Dia. Max. 8″
Sanding Spindle Dia. 1″
Sanding Speed 0 ~ 3600 RPM
Range of Workpiece Width 2″ ~ 70″
Min. Length of Workpiece 4″
Range Of Workpiece Thickness 1/6″ ~ 4″
Sanding Belt Width 1″ ~ 4″
Sanding Belt Length 98″
Belt Tilts -45° ~ +90°
Belt Drive Motor 2 HP 
 Sanding Belt Speed 0 ~ 2400 FPM
Profile Head Stroke 0 ~ 3″
Sanding Pressure 1 ~ 5 LBS