6″ x 4″ Two Side Moulder Planer
PRICE: call for pricing.
Feed speeds ranging from 20′ ~ 98′ per minute is a standard feature; faster feed speeds up to 120 feet per minute are available.
The full safely enclosure cover as chips guard and helps to reduce noises.
Table surface is hard-chrome plated for maximum wear resistance.
All manually adjusted turning parts are housed in dry bearings for oil-free lubrication.
One-piece, cast iron machine frame and table is especially normalization heat treated for maximum stability and rigidity.
The smooth initial feeding of the stock is achieved by the independently powered infeed rollers.
All spindles are precision constructed and especially heat treated to provide maximum cutting stability and permanent accuracy.
Standard spindle speed is 8,000 RPM. Higher spindle speeds are available upon request.
Fence adjusted is quickly accomplished by a quick-setting lever.
The independent section pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect.
The entire motion controls of the machine are centralized on the control panel for convenient operations.
All control levers for the spindles are located at the front of the machine for convenient adjustment.
Each spindle is provided with a mechanical digital read out, providing accurate adjustment.
The front pressure plate features draw-back performance which fully avoids damage on cutters caused by an over-height workpiece.
The rear pressure plate provides extremely uniform molding pressure for outstanding parallelism accuracy of machining.
An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high speed running.
The roller in the infeed table is powered, providing a smooth feeding effect for the tough stock.
The spindles are lubricated by the centralized lubrication system for convenience.
|Max. (Min.) Working Width||6″ (3/4″)||6″ (3/4″)||6″ (3/4″)||8″ (3/4″)|
|Max. (Min.) Working Thickness||4-3/4″ (5/16″)||4-3/4″ (5/16″)||4-3/4″ (5/16″)||4-3/4″ (5/16″)|
|Min. Working Length||9½”||9½”||9½”||9½”|
|1st Spindle Horsepower||5½ HP||7½ HP||7½ HP||7½ HP|
|2nd, 3rd Spindle Horsepower||~||5½, 5½HP||5½, 5½HP||7½,7½ HP|
|4th, 5th, 6th Spindle Horsepower||7½, ~, ~ HP||10, 7½, ~ HP||10, 7½, 7½ HP||15, 10, ~ HP|
|Feed Motor||3 HP||3 HP||4 HP||5½ HP|
|Elevation||1/2 HP||1/2 HP||1 HP||1 HP|
|Spindle Diameter||40 MM||40 MM||40 MM||40 MM|
|Cutter Speeds (RPM)||6500||6500||6500||6500|
|Variable Feed Speeds (FPM)||16 ~ 66||16 ~ 66||17 ~ 66||16 ~ 82|
|1st Bottom Head||5″||5″||5″||5″|
|2nd, 3rd Vertical Head||5″ ~ 6-1/4″||5″ ~ 6-1/4″||5″ ~ 6-1/4″||5″ ~ 6-1/4″|
|4th ~ 6th Head||5″ ~ 7″||5″ ~ 7″||5″ ~ 7″||5″ ~ 7″|
|Pneumatic Air 90 PSI (CFM)||5||5||5||5|
|Dust Outlet Diameter||5″ x 2||5″ x 5||5″ x 6||5″ x 5|