PRICE: Call for pricing

Feature:

• Feed speeds ranging from 20′ ~ 98′ per minute are a standard feature, faster feed speeds up to 120″ per minute are available.

• The full safety enclosure cover as chips guard and helps to reduce noises.

• Table surface is hard-chrome plated for maximum wear resistance.

• All manually adjusted turning parts are housed in dry hearings for oil-free lubrication.

• One-piece, cast iron machine frame and table is especially normalization heat treated for maximum stability and rigidity.

• The smooth initial feeding of the stock is achieved by the independently powered infeed rollers.

• All spindles are precision constructed and especially heat treated to provide maximum cutting stability and permanent accuracy.

• Standard spindle speed is 8,000 RPM. Higher spindle speeds are available upon request.

• Fence adjusted is quickly accomplished by a quick-setting lever.

• The three independent section, pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect.

• The entire motion controls of the machine are centralized on the control panel for convenient operations.

• Each spindle is provided with a mechanical digital read out, that gives accurate adjustment.

• All control levers for the spindles are located at the front of the machine for convenient adjustment.

• The pressure roller for short stock can be raised fast, providing maximum convenience while cutter changing or setup.

• The device permits the feeding of short stocks with a minimum length of 8″.

• Vertical spindle adjustment up to 80 mm, it allows to fit several tools on the vertical spindle, eliminating troublesome cutter change.

• Separate adjustment of vertical spindle and insert table, permits the table to be positioned extremely close to the cutter head for added cutting stability.

• The front pressure plate features draw-back performance which fully avoids damage on cutters caused by an over-height workpiece.

• The rear pressure plate provides extremely uniform molding pressure for outstanding parallelism accuracy of machining.

• An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high speed running.

• The roller in the infeed table is powered, providing a smooth feeding effect for the tough stock.

• The spindles are lubricated by the centralized lubrication system for convenience.